How To Paint Over Orange Peel Walls

• Painting

How To: Paint Textured Walls

Follow this step-past-step tutorial to make low-cal work of painting the finicky surface of a textured wall.

Photo: istockphoto.com

While an attractive fashion to update a knockdown, skip trowel, or orange peel stop, attempting to paint a textured wall can be a trying task. Traditional paint brushes tend to skip the peaks, valleys, and indentations, leaving unsightly bare patches that require multiple passes to comprehend fully. Merely all hope is not lost for do-it-yourselfers. If yous're preparing for a paint task, follow along with this guide on how to paint a textured wall. Its meticulous technique using either a roller or wall castor—a paint applicator that'due south wider and thicker than a standard brush, with flexible square-ended bristles that concord more paint—will let you lot paint over any textured wall with stellar results and minimal effort.

Tools & Materials

• Pigment primer
• Interior paint
• Tarp
• Drop cloths
• Painter'south record
• Work low-cal
• See full list «
• Putty knife
• Spackling compound
• Vacuum
• 1-gallon saucepan
• Liquid dish soap
• Microfiber fabric
• Work gloves
• Respirator
• Paint roller tray
• Paint roller
• Thick-nap roller cover
• Angled paintbrush
• Chip castor
• Small roller cover

Step one

Choose a primer designed for textured surfaces (typically labeled every bit "high build" or "problem surface"). Opt for either a white or a tinted primer close to the color of the paint. Either latex or oil-based works here, but keep in listen: Oil-based is more versatile because you can top information technology with either latex or oil-based pigment, whereas oil-based pigment won't attach too to latex primer.

RELATED: viii Painting Mistakes Nearly Everyone Makes

Step two

Choose either a latex or oil-based paint with a low maintenance finish that's cogitating enough to highlight the details of the wall texture—a satin or semi-gloss sheen, rather than a flat matte finish.

Step 3

Motility article of furniture to the centre of the room and cover with tarp to protect them when you begin to paint textured walls. Lay additional drop cloths on the floor below the textured walls. Disassemble mirrors, artwork, and window treatments. Use painter'due south record to cover baseboards, ceiling trim, and whatsoever other areas of yous don't want to paint.

Turn off light switches or fixtures, shut off the circuit breaker to the room, then detach electrical outlet and light switch cover plates. Use painter's tape to mask anything that cannot exist removed but should non exist painted.

While you've removed near of your light sources, exercise set and plow on a bombardment-operated work lite in the room facing the painting surface so that you can more clearly see the texture of the wall handling.

Don't desire to do it yourself?

Get gratis, no-commitment estimates from pro painters near you.

+

Pace 4

Fill any holes or divots on the surface using a spackling compound and a putty knife. Allow the compound cure according to package instructions.

Step 5

Vacuum the entire textured wall to eliminate any dust on and between the grooves with a castor attachment.

Stride 6

In a gallon-sized bucket, dilute one ounce of liquid dish soap in one gallon of warm water. And then wipe down the wall with a clean cloth saturated with the soapy solution to lift grit and grime. Brand a second pass with a water-dampened material and permit to dry fully.

Photo: istockphoto.com

Footstep 7

Donning gloves and a respirator, fill a paint tray with primer and load a wall brush or paint roller with a thick nap cover. When painting textured walls—or whatsoever walls, actually—apply a coat of primer to the wall in "W" shaped strokes for maximum coverage, starting with the top left corner and moving downward. Allow cure co-ordinate to packet instructions.

If discoloration or other cosmetic flaws on the wall persist after the showtime primer coat cures, follow with a 2nd coat and let dry completely.

Step eight

Fill a fresh paint tray with paint, dip a 2″- to 4″-wide angled brush into the tray and use this to "cut in", painting the edges of the wall to protect abutting surfaces such as ceilings from errant pigment strokes.

Pace 9

Load a fresh, 1-¼"- to ane-½"-thick-nap roller embrace or wall brush from the aforementioned tray, and paint textured walls using the aforementioned technique you did to prime them: Make a pass over the wall in "W"-shaped strokes, working from the top down until the entire wall is covered. If, while using a roller, you detect that the paint isn't reaching the recesses of a detail region, go over it with a wall castor.

When finished, examine the wall to check for missed areas and touch upwardly as necessary with either a chip brush or a smaller roller cover. Let the first glaze of paint cure according to the package instructions.

Step 10

If yous want a deeper hue, repeat Steps 8 and ix and paint the textured walls with a second coat. Then, let information technology cure completely before reconnecting low-cal fixtures and otherwise restoring the room.

Don't want to do information technology yourself?

Become free, no-commitment estimates from pro painters about you lot.

+

Source: https://www.bobvila.com/articles/how-to-paint-textured-walls/

Posted by: velardefourning.blogspot.com

Share this post